Plaster walls might seem appealing and tough, but attempting to install a screw eye-bolt that is simple can trigger cracking and crumbling. Preserve the worth of your house by installing the bolts correctly, and prevent expensive repairs. Using techniques enables one to install any kind of bolt or screw in the plaster, maybe not just screw-eyes. When you no longer you no longer require the bolt, it is possible to quickly re-gain your wall having a plaster patch that is rapidly used.
The wall stud supporting the plaster. Before you hear a great thud rather than a sound tap the wall along with your knuckles. Use an electronic stud finder to to find wall studs.
Place a bit of masking tape on the wall-in the stud area, where you want to install the screw-eye bolt. Mark the tape using a pencil in the installation level. Tape stops the plaster.
Drill a pilot hole that is screw in the marked place. Use a bit one dimension smaller compared to shafted of the eye-bolt.
Insert the screw-eye bolt to the pilot hole. Screw it in yourself to tighten it. Insert the shaft of a screwdriver through the eye-bolt. Turn the bolt by utilizing it and grasping both ends of the screw-driver. Leverage, making it more straightforward to to screw in the bolt is provided by the screw-driver.
After installing the eye-bolt remove the tape in the wall.